HEXA HSDVR3507A, User Manual

Page: 42 / 88

H.264 Network DVR
Copyright 20090by hexacctv co.,Ltd
【 Protocol 】 Choose the corresponding control protocol : Pelco_P, Pelco_D, the default is Pelco_D.
【 Baud Rate 】 Choose baud rate of the corresponding speed dome cameras, it can control the corresponding channel's PTZ and cameras, the
scope is 1200-115200, the default is 9600.
【 Data Bit 】 From 5 to 8, the default is 8.
【 Stop Bit 】 1,2, the default is 1.
【 Check 】 None,odd parity,Even Parity,default is none.
【 Flow Control 】 None,Xon/Xoff, the hardware, the default is None.
【 Copy setting to the following channel 】 Copy the setup to all channels,realizes the same PTZ establishment.
Note:Users should save each channels PTZ parameter separately after setup complete.
6.5 Network Setup
"Main Menu"-"System"-"Network Setup" (Figure 6-6)
Figure 6-6