a. Retrieve the list of time zone codes.
help set timezone str
b. Choose a location that is in your time zone and specify your time zone code:
set timezone str=
CODE
For example:
RMC cli>
set timezone str=America/Thunder_Bay
10. Change the RMC
administrator
user password.
set password
The system prompts for the
administrator
user password when the
administrator
user logs into the
RMC over the network.
NOTE: The factory-assigned
administrator
user RMC password is on an Hewlett Packard Enterprise factory
Locate the RMC password sticker. If a customer changes this password, they assume
responsibility for keeping this password known to their staff and to Hewlett Packard Enterprise representatives who
might need the RMC password in the future.
11. Reboot the RMC for the changes to take effect.
reboot rmc
12. To test new IP address and password for the RMC, open another terminal window, and enter the following command:
ssh administrator@
NEW_RMC_IP_ADDRESS
13. View the DNS configuration.
show dns
14. Display and make note of the RMC hostname and IP address.
show network
15. Verify the time and date settings.
show date
16. Remove the USB cable from the RMC and from your laptop.
Connecting the RMC to the network through an AUX with LAN cable
Prerequisites
The manageability network must be a private server management network within a corporate LAN.
Procedure
1.
Connect LAN cable to RMC AUX.
2.
SSH with laptop and log in to RMC.
3.
Display the CLI prompt by pressing
Enter.
4.
Retrieve the planning information you collected in
Preparing to configure the HPE Superdome Flex Server.
Configuring the HPE Superdome Flex Server
20
