manualshive.com logo in svg

Hewlett Packard Enterprise Smart Array P416ie-m SR Gen10 Controller, User Manual

Share
Download
Hewlett Packard Enterprise Smart Array P416ie-m SR Gen10 Controller User Manual Download Page 59

Replacing Synergy SAS storage solution components

Replacing HPE Synergy 12Gb SAS Connection Module

Removing the HPE Synergy 12Gb SAS Connection Module

Procedure

1. Open the release lever.

2. Remove the failed module from the frame interconnect bay.

Installing the replacement HPE Synergy 12Gb SAS Connection Module

CAUTION: Removing a module can significantly change air flow within the operating frame. Each frame bay must be
populated with a module or blanking panel for the frame to cool properly. Remove a module or blanking panel from a
frame bay only when a new module is available to install in that bay.

CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before beginning
any installation, removal, or replacement procedure. Improper grounding can cause electrostatic discharge.

To install the replacement SAS connection module, see "

Installing an HPE Synergy 12Gb SAS Connection Module."

Verifying proper operation

Check the following to verify that the module is working properly:

• LEDs—See 

Front panel and LED definitions and check for healthy LED patterns.

• HPE OneView—View system information, status alerts, device information, and confirm that the device status is Normal.

For more information on accessing and using HPE OneView, see the online help in the product or the HPE OneView Help
for HPE Synergy in the Hewlett Packard Enterprise information library (

http://www.hpe.com/info/synergy-docs).

Operations

59

Summary of Contents for Smart Array P416ie-m SR Gen10 Controller












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands