Hewlett Packard Enterprise ProLiant DL360 Gen10 Plus, User Manual

Page: 98 / 257

Installing an 8SFF display port/USB/optical blank option Installing an 8SFF display port/USB/optical blank option
Prerequisites Prerequisites
Before installing this option, be sure that you have the following:
The components included with the hardware option kit
T-10 Torx screwdriver
An optical drive, if installing
For more information, contact a Hewlett Packard Enterprise authorized reseller.
Procedure Procedure
1. Back up all server data.
2. Power down the server (Power down the server).
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. Extend the server from the rack ( Extend the server from the rack ).
b. Remove the server from the rack ( Remove the server from the rack ).
5. Remove the access panel ( Remove the access panel).
6. Remove the bay blank.
7. Install the 8SFF display port/USB/optical blank option.
Installing an 8SFF display port/USB/optical blank option 98