Hewlett Packard Enterprise ProLiant DL360 Gen10 Plus, User Manual

Page: 3 / 257

Table of contents Table of contents
1 Component identification
1.1 Front panel components
1.2 Front panel LEDs and buttons
1.2.1 UID button functionality
1.2.2 Front panel LED power fault codes
1.2.3 Systems Insight Display LEDs
1.2.4 Systems Insight Display combined LED descriptions
1.3 Rear panel components
1.4 Rear panel LEDs
1.5 System board components
1.5.1 Heatsink and socket components
1.5.2 System maintenance switch descriptions
1.5.3 DIMM slot locations
1.5.4 DIMM label identification
1.5.5 Intel Optane persistent memory 200 series for HPE label identification
1.6 Drive numbering
1.7 HPE Basic Drive LED definitions
1.8 Hot-plug fans
1.9 DSC-25 2-port SFP28 card ports and LEDs
1.10 HPE NS204i-p NVMe OS Boot Device components
1.11 HPE NS204i-p NVMe OS Boot Device LED definitions
2 Operations
2.1 Power up the server
2.2 Power down the server
2.3 Extend the server from the rack
2.4 Remove the server from the rack
2.5 Remove the access panel
2.6 Install the access panel
2.7 Remove the hot-plug fan
2.8 Remove the primary PCI riser cage
2.9 Install the primary PCI riser cage
2.10 Remove the secondary PCI riser cage
2.11 Install the secondary PCI riser cage
2.12 Remove the 8SFF drive backplane
2.13 Removing the hard drive blank
2.14 Removing a hot-plug SAS/SATA/NVMe drive
2.15 Release the cable management arm
2.16 Accessing the Systems Insight Display
3 Setup
3.1 Optional services
3.2 Optimum environment
3.2.1 Space and airflow requirements