Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Maintenance And Service Manual

Page: 66 / 179

To replace the component, reverse the removal procedure.
Removing and replacing the LFF optical drive
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
•
Extend the server from the rack.
• Remove the server from the rack.
4. Remove the access panel.
5. Remove the fan cage.
6. Disconnect all cables from the LFF power switch module.
7. Remove the LFF power switch module.
8. Remove the optical drive.
Removal and replacement procedures
66