Item
Description
Status
1
Health LED
• Solid green = Normal
• Flashing green (1 Hz/cycle per sec) = iLO is rebooting
• Flashing amber = System degraded
• Flashing red (1 Hz/cycle per sec) = System critical
2
Power On/Standby button and
system power LED
• Solid green = System on
• Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
• Solid amber = System in standby
• Off = No power present
3
NIC status LED
• Solid green = Link to network
• Flashing green (1 Hz/cycle per sec) = Network active
• Off = No network activity
4
UID button/LED
• Solid blue = Activated
• Flashing blue:
◦
1 Hz/cycle per sec = Remote management or firmware
upgrade in progress
◦
4 Hz/cycle per sec = iLO manual reboot sequence
initiated
◦
8 Hz/cycle per sec = iLO manual reboot sequence in
progress
• Off = Deactivated
When all four LEDs described in this table flash simultaneously, a power fault has occurred.
If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
Facility power is not present, the power cord is not attached, no power supplies are installed, power supply failure has occurred, or the power
button cable is disconnected.
Component identification
124
