7. Disconnect all cables from the universal media bay.
8. Remove the universal media bay.
To replace the component, reverse the removal procedure.
Removing and replacing the LFF power switch module
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack.
5. Remove all hot-plug hard drives.
7. Disconnect all cables connecting the power switch module to the system board and other components.
8. Feeding the cables through the front of the server, remove the power switch module.
Removal and replacement procedures
63
