Removing and replacing a power supply blank
Procedure
Remove the component as indicated.
To replace the component, reverse the removal procedure.
Removing and replacing the AC power supply
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
with either a component or a blank.
Procedure
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Access the product rear panel.
4. Remove the power supply.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or power supply blank to
cool before touching it.
Removal and replacement procedures
51
