6
I
NSTALLING
Y
OUR
O
UTPUT
W
IRING
Output wiring must be properly connected for your
specific requirements. Make all connections with
good quality contacts or solder joints to ensure
proper electrical contact.
Detailed receiver wiring information is supplied with
the documentation inside the front cover of your
receiver.
Supply voltage and ground wiring must be
connected to reliable connecting circuitry.
Power supply wiring must be at least AWG 12 for
DC applications (to prevent power drop). For metric
equivalent wire and cable sizes,
see
C
ONNECTING
Y
OUR
E
LECTRICAL
W
IRING
Connect all remaining wires according to the wiring
diagram of the machine and the radio remote
control.
A
TTACHING
Y
OUR
W
IRING
H
ARNESS
Plug your wiring harness into the receiver and into
the corresponding machine controls.
CAUTION: Assign a qualified technician to
connect the wiring.
Improper wiring connections may cause
serious component damage and void the
warranty.
WARNING: Do not use a chassis ground or
equipment damage will result. Connect the
ground wire to the vehicle battery negative
post.
Assign a qualified technician to calculate the
current and voltage drop, and determine the
proper cable size for your application.
WARNING: Induced voltage spikes can
cause erratic controls performance.
Make sure output control signals for any
proportional control valves are routed
separately from wiring that could produce
transient voltage interference.
!
!
!
