8
A
CCESSORIES
I
NSTALLING
Y
OUR
E
XTERNAL
A
NTENNA
(O
PTIONAL
)
There are numerous configurations of external
antennas. The following procedure explains how to
install the external antenna commonly used with this
receiver.
If you need further information, please contact your
supervisor for next steps.
1. Unscrew the existing antenna (by the nut) from
the receiver housing.
Figure 1: Existing Antenna
NOTE: See the following Antenna Extension
2. Screw the antenna (1) to the antenna
extension (4). Do not overtighten.
3. Screw the receiver connection (5) to the
antenna base (6). Do not overtighten.
Figure 2: Antenna Extension Diagram
4. Insert the mounting screws through the
mounting screw holes (3).
5. Secure the Antenna Wall Mount Holder (2) to
the desired mounting surface.
CAUTION: Choose the correct antenna
length for your application.
Do not cut, splice, alter or coil your antenna
or reception may be adversely affected.
CAUTION: Unscrew antennas by the nut or
equipment damage will result.
!
!
Unscrew by
the nut
Table 1: Antenna Extension
1
Existing Antenna
2
Antenna Wall Mount Holder
3
Mounting Screw Holes
4
Antenna Extension
5
Receiver Connection
6
Antenna Base
WARNING: Do not route the antenna cable
with power or control wiring. Intermittent
signal loss will result.
4
1
2
3
5
6
!
