USE
R’S MANUAL |
ERGO-S
22
10. W
arranty, Service, Repairs and Maintenance
Before any service or maintenance intervention on remote controlled equipment always:
•
Remove all electrical power from the equipment
•
Follow lock out procedures
Hetronic products are covered by a guarantee/warranty against material, construction and manufacturing faults. During the
guarantee/warranty period, Hetronic may replace the product or faulty parts. Work under guarantee/warranty must be carried out by
Hetronic, or by an authorized service centre specified by Hetronic. Any modification, reconstruction or extension of the systems without a
written agreement of Hetronic may lead to the loss of your warranty and guarantee claims.
The following are
not
covered by the guarantee/warranty:
•
Faults resulting from normal wear and tear
•
Consumables e.g. batteries
•
Products that have been subject to unauthorized modifications
•
Faults resulting from incorrect installation and use
Maintenance and Preventive Care
•
Repairs and maintenance must be carried out by qualified personnel
•
Only use original Hetronic spare parts
•
Contact your representative for service or any other assistance
•
Keep the product in a clean, dry place
•
Keep battery contacts clean
•
Wipe off dust using a slightly damp, clean cloth
•
Keep rubber over-mould clean
•
Remove dust from inside gaps, docking recesses and battery contacts using a vacuum. Special care must be taken when
cleaning the battery compartment of the transmitter as detachment of the pressure balance element may lead to ingress
protection problems
NEVER USE:
•
Abrasive cleaning solutions or high-pressure water jets.
•
Sharp, pointed objects or any hard items as these may tear the over-mould or rubber parts.
•
Compressed air as this may lead to ingress protection issues.
•
Petroleum based solvents including Diesel and Gasoline to clean the unit as these may react with the silicone rubber of the
joystick gaiter.
Note: Refer to Appendix C for Spare Parts List.
