U
SER’S MANUAL |
ERGO-S
7
3.
Y
our ERGO-S Transmitter
3.1 General Description
The ERGO-S is an ergonomically designed, programmable wireless industrial transmitter for remote machine control.
Your transmitter is encased in a rugged IP65 rated housing, is battery-powered, and comes equipped with built-in low battery detection.
Standard equipment includes two 3.45Ah Lithium-Ion batteries and battery charger.
3.2 ERGO-S Basic Features
• Fully programmable via Hetronic PC-Link
• 8 push buttons with up to two detents
• 4 push buttons with single detent, one of which is the power button
• 1 proportional Joystick or Digital Selector Switch
• Minimum 100 m (300 ft.) range using CS4XX and CS8xx modules
• Minimum 60 m (196 ft.) range using CS2400 RF module
• Typically 100 m (300 ft.) range using on board MFS 2G4 radio
• Internal Antenna
• Auto power off feature (configurable)
• Infrared (configurable)
• USB Interface
• Low Battery detection
• Status bi-colour LED Red/Green
• Feedback LEDs bi-colour Red/Green
• Cable Control
• Magnetic Belt Clip
• Data Logging (configurable)
• Rechargeable battery pack
3.3 Standard ERGO-S 2.4GHz Configuration
Your ERGO-S 2.4GHz transmitter is factory programmed to one of the following switch configurations:
A. ERGO-S 2.4GHz-V1
➢
11 Single detent pushbutton
➢
1 Single detent POWER pushbutton
➢
1 Joystick or Selector Switch
B. ERGO-S 2.4 GHz-V2
➢
3 Single detent pushbuttons
➢
8 Double detent pushbuttons
➢
1 Single detent POWER pushbutton
➢
1 Joystick or Selector Switch
