USE
R’S MANUAL |
ERGO-S
14
5.2.3. General Settings
The following settings may be accessed and adjusted from their respective menus as outlined below:
Figure 8. Options found under General Settings menu
▪
TFT Brightness
TFT brightness can be adjusted between setting 1 and setting 8, with 8 being the brightest.
Figure 9. Adjusting TFT Brightness
1. Press button #3 to enter General Settings menu.
2, Press button #1 to go to Brightness page.
3. Press button #1 to increase brightness or button #2 to decrease brightness.
4. Press button #3 to save the new setting and return to the General Settings menu.
▪
Operational Access Code
Figure 10. Making Changes to the Access Code
1. Press button #3 to enter General Settings menu.
2. Press button #2 to go to Access Code page.
3. Press button #3 to increment (or button #4 to decrement) the highlighted digit and button #2 to confirm and move on to the next
digit.
4. When all the required changes have been made, press button #2 to confirm the new access code.
