U
SER’S MANUAL |
ERGO-S
13
▪
Frequency Channel or Group
1. Press button #1 to enter Radio Settings menu.
2. Press button #2 to scroll through the list of channels or groups until the desired one is visible.
3. Press button #
4 to save selection and return to main ‘Device Settings’ page.
▪
Transmitter Baud Rate
The allowable baud rates of the control telegram that may be configured are 4800 or 9600bits/second for the Hetronic standard 4xx-8xx
MHz radio modules. The standard baud rate of 115200bits/second is used for Hetronic standard 2.4GHz radio modules. To change the TX
Baud Rate when the transmitter is in Service Mode one has to:
1. Press button #1 to enter Radio Settings menu.
2. Press button #3 to scroll through the available baud rates and stop when the desired one is visible.
3. Press button #4 to save selection and return to
main ‘Device Settings’ page.
The baud rate for the transmitter must be identical to that of the receiver.
Whenever the baud rate of a unit is changed, the
baud rate of the paired unit must be changed accordingly.
Note:
The coder still supports all other baud rates in cases when non-standard radio modules are used.
5.2.2. Button Diagnostic Checks
The button diagnostic checks can be carried out directly from the transmitter to ensure that all 1-Step and 2-Step switches are working
properly.
1. Press button #2 for Button Diagnostic page
from main ‘Device Settings’ menu.
2. Press any front (1-step or 2-step) or side (1-Step) buttons to test proper functionality.
When pressing the first step of a 2-Step button, the respective diagnostic identifier for that button switches on blue. When the second step
is pressed, the identifier will change to green. 1-Step switches will only use the blue identifier. If a button is not functioning well, the
diagnostic identifier remains on.
Figure 7. Button Diagnostic page on Transmitter
Once all checks are made, the user can return to the main screen by making sure the STOP button is pressed whilst holding buttons #1
and #2 pressed simultaneously.
Side switch
diagnostic
identifier
Front
panel
switch
diagnostic
identifier
