Technical File
File No.
ZHTF-CE-01-015
Rev. No.
A.5
Non Contact Infrared Body
Thermometer
Instructions for use
Rev. Date
2020-07-10
Page
15 / 19
15
3
. The patient is an intended operator. The patient can measure and change battery.
Under normal circumstances and maintain the device and its accessories according to
the user manual.
8 Calibration
The thermometer is initially calibrated at the time of manufacture. If this thermometer is
used according to the use instructions, periodic re-adjustment is not required. If at any
time you question the accuracy of temperature measurements, please contact us timely.
EMC Declaration
1) This equipment needs to be installed and put into service in accordance with the
information provided in the ACCOMPANYING DOCUMENTS;
This product needs special precautions regarding EMC and needs to be installed and put
into service according to the EMC information provided, and this unit can be affected by
portable and mobile RF communications equipment.
2)* Caution: Do not use a mobile phone or other devices that emit electromagnetic fields,
near the unit. This may result in incorrect operation of the unit.
3) *Caution: This unit has been thoroughly tested and inspected to assure proper
performance and operation!
4) * Caution: this machine should not be used adjacent to or stacked with other equipment
and that if adjacent or stacked use is necessary, this machine should be observed to verify
normal operation in the configuration in which it will be used.
Guidance and manufacture’s declaration – electromagnetic emission
The Infrared Body Thermometer is intended for use in the electromagnetic environment specified below. The
customer of the user of theInfrared Body Thermometer should assure that it is used in such an environment.
Emission test
Compliance
RF emissions
CISPR 11
Group 1
RF emission
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations/ flicker emissions
IEC 61000-3-3
Not applicable