Hesperide GIBRALTAR 165007, Manual

Page: 5 / 29

CARE INSTRUCTIONS
1/ Your product
Properties
Aluminium is a light, resistant material that doesn't rust.
Resin wicker PE (polyethylene) is a recyclable plastic material (polyethylene.) Its braiding is done by hand.
Polyester is a synthetic fabric that offers good resistance to tearing and rubbing.
Manufacturing and assembly
The manufacturing then assembly of this product requires leaving clearance between the different parts.
It is therefore normal to observe gaps/slack that may reach several millimetres between the different assembled elements
(between two slats, between boards...).
This tolerance necessary for the correct realisation of your product can be behind little geometric differences.
This does not lead to any loss of function of your product.
Irregular appearance
Each product is manufactured and assembled industrially from parts whose surface treatment is carried out individually,
before assembly. These metallic elements cannot be free from appearance irregularities coming both from the surface treatment
process and assembly operations. The final appearance of the product is therefore directly linked to these possible irregularities.
Regularity of seams
Although we pay special attention to the quality and regularity of seams, it is possible to notice that some threads are not cut
after the break point of the seam. There is no risk of the seam becoming undone. Cut this thread with a simple pair of scissors.
Regularity of the braiding
This garden furniture is entirely hand braided. The braiding technique consists in an intertwining of synthetic resin strands around
a metallic structure. It is possible to observe braiding tension differences. At each break point, the end of the strand in addition,
ranging up to a few centimetres, is inserted into the braiding. If this strand comes out, put it back in place. There is no risk of the
braiding becoming undone.
Synthetic resin imitates natural rattan. Rattan has appearance irregularities that give it its unique character. The manufacturing
process reproduces these variations in look and shade.
2/ Precautions for use
Watch out for blows from knives and other sharp objects handled nearby. Watch out too for burns from cigarettes and from
other heat sources.
If you don't use your cushions for a long period, it is advised to put them away to avoid possible discolouration during too long
an exposure to UV rays.
3/ Maintenance and ageing, siding
It is normal to note natural wear and tear of the product over time and with use, in the form of an alteration of the colours and
the state of the surface, the mechanical functions and tightening of the screwed elements.
Exposure to UV rays
Over time, you can see a discoloration of the materials exposed to UV rays (textiles, paint, plastics), a phenomenon also due
to the rays of the sun as well as those of the moon. This evolution of colours exposed to external elements is normal and
concerns in particular bright colours.
Everyday maintenance
Your product is subject to external elements, it must therefore be regularly cleaned.
Remove stains immediately.
Clean with a damp cloth soaked in warm soapy water (or hot water for more marked dirt) or a specific, adapted product.
Rinse thoroughly.
Finish with a clean, dry cloth.
If in doubt, consult a reseller or the material sheet on the Hesperide.com website.
In the absence of regular cleaning your product will imperatively deteriorate.
Cushions care instructions
Wash by hand in warm water. Do not dry-clean, do not use the tumble dryer, do not use the iron. Leave to dry in the sun before
putting the cushions back in place.
Weather conditions (wind, rain, snow, hail, salty winds)
The outdoor furniture is designed to be used in normal outdoor weather conditions. Strong climatic hazards or exceptional
weather conditions can have repercussions on the look, correct use and lifespan of the product. It is strongly advised to use
tarpaulin with a ventilation system during the season when the furniture remains outside.
Rain and humidity
If it is left out in water, the furniture will take several days to dry. Nothing abnormal in that, but ensure that you wipe it to prevent
the water from stagnating on it. The presence of prolonged humidity speeds up the product ageing and favours the appearance
of rust indeed mould.