6
HE 5760 Operating Instructions
# 372449| Version 3.2
1 Legal Provisions
Manufacturer
HESCH Industrie-Elektronik GmbH, Boschstraße 8, 31535 NEUSTADT | GERMANY
Intended use
The HE 5760 is a master-slave control for the cleaning process of industrial dust
extraction systems.
The expansion to a complete cleaning control system is carried out with the HE 5725
valve controllers, each of which controls 12 valves. Up to 48 valve controllers can be
centrally controlled as CAN slaves by the HE 5760. The valves are assigned to so-
called filter chambers. The control is set to the existing number of chambers and
valves using the parameter menu. Parameterisation can also be carried out with the
PC software 'SmartTool' via the USB interface.
The HE 5760 control unit is located in a front-mounted housing with membrane
keypad and graphic display and is designed for installation in control cabinets. Local
operation at the control cabinet with switchgear and signal lamps that are connected
directly is possible.
The device can be operated within the operating and environmental conditions
approved in these operating instructions without impairing its safety.
The manufacturer is not liable for improper use and any resulting personal injury or
material damage; the risk is borne solely by the user. Failure to comply with the above
criteria for intended use will result in the expiry of the warranty and liability for the
device.
Personnel qualification
All work on the differential pressure transducer may only be carried out by qualified
electricians with sufficient knowledge in the field of electrical engineering.
Device Safety
The device has been constructed and tested in accordance with VDE 0411 / EN 61010-1 and
has left the factory in perfect safety condition. To maintain this condition and ensure safe
operation, the user must follow all instructions and warnings in this quick guide.
