12
ENG
7. INStrUCtION FOr ArMAtUrE INStALLAtION
rinse all water tubing thoroughly before installation. Connect the sanitary armature in the
opened position. Unscrew the pearlator on the extractable shower using the enclosed
key. take care that the spring is inserted. Insert the armature with the 45 mm diameter flat
gasket into the 35 mm diameter hole on the wash sink. Insert the 45 mm diameter seal, the
fixing plate and the washer from the lower side, tighten the fixing nut by hand and finish
the armature fixing by the M4 latching screws. Screw the weight onto the flexible tube at
400 mm from the lower armature edge so that the shower can be extracted from the ar-
mature in a length up to 400 mm. Care has to be taken that the flexible tube doesn’t stick.
Connect the extractable shower flexible tube with the 14 mm diameter seal inserted to the
corresponding armature connection. When installing flexible tubes, care has to be taken
that the tubes don’t rotate during screwing.
extractable shower
perlator
weight with screws
cold water
extractable shower flexible tube
fixing plate
cold water inflow
angle-body valves
flat gasket
hot water
washer
fixing nut
latching screw M4
warm water inflow
