Herutu TW-510R, Instruction Manual

Page: 7 / 24

TW-510R
1
1.General descriptions
This machine is used combined with our Radio transmitter for Torque wrench(hereinafter
abbreviated as “TW-510T”).
（
Use this machine in combination with the Transmitter of the same
radio frequency.
）
Once the t
ightening completion signal is received from “TW-***t” , the relay turns on just as
buzzer sounds.
・
The wireless communication using the weak radio wave of 259MHz zone with less noise
detects an error during receiving to achieve the reliable form of communication with fewer
malfunctions.
・
The relay output time and double count prevention time can be set by the rotary switch.
・
The ID can be set up to 256-type.
・
The built-in Output AC plug outlet is well suited for installing the Receivers with being lined
up.
For the “TW-510R”, the following models are available as an option (for value) before shipment.
● TW-510RD
：
“Diversity type” Receiver consisting of two receiving modules where two
antennas can be installed, which enables the stable communication
under the poor environment.
● TW-510RW
：
“Two-unit receiving type” Receiver that can individually process the signals
transmitted from two Transmitters of different ID. This is used for the
application where one operator uses the Torque wrenches of different
types and also those each device should be separately controlled.
● TW-510RDW
：
This is the model combined with both functions of the above ”RD”
and ”RW” type.
1.General descriptions