TW-510R
5
3.
Names and functions of each part
⑥
LED for receiving RX1
：
keeps lighting for 0.2 second when receiving the tightening
completion signal through the RX1 antenna.
⑦
Power LED
：
keeps lighting during Power supply ON.
⑧
Output terminal block 1
：
Relay turns on when the tightening completion signal of ID1 is
received. (OUT1)
⑨
Power SW
：
turns ON/OFF of machine power supply.
⑩
AC Outlet plug for output
：
directly outputs the AC100V fed through the power cord.
Output does not run in conjunction with Power SW. Operation is
only permitted within max 125V 12A load current.
⑪
Power cord
：
feeds the power for operation. Supply the AC100V 50/60Hz.
⑫
Product No. seal
：
Product number and radio frequency are stated. For the radio
frequency, R2→259.55MHz and R4→259.65MHz.
Names and functions of parts used for [TW-510RD, RW, DRW] model:
⑬
ＲＸ２
Antenna connector
：
Only for the TW-510RD model, BNC type connector is
available. This connector connects the attached external
antenna (HTG-300-4). Connector type
：
BNC-J
[Available for
“RD”/”RDW” model]
⑭
LED for receiving RX2
：
keeps lighting for 0.2 second when RX2 antenna receives the
tightening completion signal.
[Ava
ilable for “RD”/”RDW”]
⑮
Output terminal block2
：
Relay turns on when the ID2 tightening completion signal is
(OUT2) received. [Available for”RW”/”RDW”]
External antenna
：
connected to the Diversity type antenna connector when Diversity
model is used. This is the magnet base type provided with 4m cable.
(Model: HTG-300-4)
[Available for
“RD”/”RDW” model]
⑯
External
antenna
HTG-300-4
Summary of Contents for TW-510R
Page 2: ......
