16
Operation
5.Operation
If installation and setup of display and controller can be performed, please turn on each power
supply. Communication channel and equipment No. is displayed each for 1 second.
Display changes the contents received when the date was received from controller.
If the display doesn
’t receive the data from controller, LED light off the all-points light after 3
seconds turning on.
If the display doesn
’t receive the data normally for 30 seconds except immediately after power
supply, LED light off the all-points light.*1
If there are above situation, please arrange installation and setup of display and controller.
*1:It is only case of setting that Display Latch of function setting is
“No”.
If you use
“Direct Display” way, it is only case of setting that Command is “lights off after 30
seconds
”
Displayed Comm.Channel
1 second
Displayed Equipmtnt No.
1 second
If the display doesn
’t receive the data from
controller, LED light off the all-points light
after 3 seconds turning on.
Displayed receiving data
From controller
Power ON
