7
Setting and Installation methods
4. Setting and Installation methods
4-1. Installing the Display
Install the Display in a place so that it can be easily seen from the Controller. For the
installation in a place with a poor visibility, select an installation site without obstacles
near the antenna as far as possible.
Besides, direct the antenna diagonally upward. Do not direct it downward while being
in parallel to the side of display.
By nature, the LED is most visible from the front. Install it at an angle so that you can
see it from the front.
4-2. Connecting the Power cord
The product is shipped with Power cord being mounted.
If you need to disconnect/connect the Power cord due to some reasons, connect the Power
cord according to the manual.
①
Disconnect the side panel(L).
Make antenna arranged perpendicular to the side panel (L), and remove the screws (4
pieces) for acrylic plate fixing the side panel (L). Move the side panel (L) to remove it in
parallel to the antenna so that it cannot be caught by that antenna.
Good example
Poor example
Front view
