14
Setting and Installation methods
4-5. Setting the equipment No.
Use the DIP Switch on CPU board built in the Display to set the Equipment No.
Slide the acrylic plate at front to remove the CPU board at front of Display. Set the
Equipment No, which is precisely matched with the contents of the communication format
transmitted from the equipment at transmitter.
Use the DIPSW 1 to 7 on CPU board to set the Equipment No.
The setting ranges are 0 to 99.
Turn off the power source before changing the setting.
*For the 485 Communication type, TELEMATE III and WCS-300 are not built in.
CPU board (DIPSW for setting)
DIPSW for setting
DIPSW 1 - 7 for setting
Equipment No.
