8
Setting and Installation methods
②
Connect the Power cord.
The terminal block for connecting the power source is at back side of display. Slide the
acrylic plate at back side to remove the terminal block.
The Power cord eject hole is at side panel (R). Connect the power cord to the terminal
block only after inserting the power cord through the eject hole.
（
Connecting it to the
terminal block without inserting the power cord through the power cord eject hole does
not allow the acrylic plate at back side to be closed.
）
③
Restore the acrylic plate and side panel to their original places.
Back side
Terminal block for connecting the
Power cord
Side panel(
Ｒ
)
Power cord eject hole
