114
EN
SPECIFICATIONS OF THE TOOLS USED FOR THE ANGLE GRINDERS
Angle grinder Extol® Premium 8892021
Grinding disc: Ø 115 mm, th. 6.6 mm, 144 g
Diamond cutting disc: Ø 115 mm, 102 g
1)
Braided cup brush: Ø 65 mm, 196 g
2)
Grinding metal at appropriate load:
yes
3)
Braided cup brush: Ø 80 mm, 374 g
Angle grinder Extol® Craft 403126
Grinding disc: Ø 125 mm, th. 6.6 mm, 172 g
Diamond cutting disc: Ø 125 mm, 120 g
1)
Braided cup brush: Ø 65 mm, 196 g
2)
Grinding metal at appropriate load:
yes
3)
Braided cup brush: Ø 80 mm, 374 g
Angle grinder Extol® Industrial 8792014
Grinding disc: Ø 125 mm, th. 6.6 mm, 172 g
Diamond cutting disc: Ø 125 mm, 120 g
Braided cup brush: Ø 80 mm, 374 g
Angle grinder Extol® Premium 8892018
Grinding disc: Ø 150 mm, th. 6.6 mm, 242 g
Diamond cutting disc: Ø 150 mm, 194 g
Braided cup brush: Ø 80 mm, 374 g
Angle grinder Extol® Premium 8892020
Wire brush: Ø 10 cm, rpm 7000
min
-1
, 860 g
Diamond disc: Ø 230 mm, 546 g
Grinding disc: Ø 230 mm, th. 6 mm, 566 g
Table 3 (continued)
1), 2), 3)
To illustrate power input under very intensive loads, the task of "grinding asphalt" with a wire cup brush was selected
since it results in high friction, which increases power input.
In table 3, for the purpose of comparison of power input with larger angle grinders, for illustration angle grinders Extol®
Premium 8892021 and Extol® Craft 403126 (750 W) were used with a braided cup brush of diameter 85 mm, which is,
nevertheless, too heavy for these angle grinders and it is not permitted to use these angle grinders with this brush as this
would result in damage to the angle grinder. These angle grinders must be used with cup brushes of diameter 65 mm.
Table 4 then shows an overview of the specified power inputs on other electric power tools.
OVERVIEW OF POWER INPUTS ON OTHER ELECTRIC POWER TOOLS
AND THE MINIMUM REQUIRED ELECTRICAL POWER OUTPUT OF THE GENERATORS
COMPRESSORS
Minimum electrical power output of the generator
Two-cylinder compressor Extol® Craft 418211
(
2 200 W
, pressure vessel 50 l)
Generator Heron® 8896413
(5.0 kW; Max. 5.5 kW)
y
Starting power input and current: 2800 W; 12.3 A
y
Power input when pressurising the vessel at a pressure of 3 bar: 1900 W
y
Power input when pressurising the vessel at a pressure of 8 bar: 2270 W
y
Power input when grinding with a pneumatic random orbital sander:
2200 W (equilibrium pressure of 4 bar)
y
Heron® 8896140 (3.0 kW; Max. 3.5 kW) can not be used
Single-cylinder compressor Extol® Craft 418210
(
1 500 W
, pressure vessel 50 l)
Generator Heron® 8896416
(2.5 kW; Max. 2.8 kW)
y
Heron® 8896411 (2.0 kW; Max. 2.3 kW) can not be used
Oil free compressor Extol® Craft 418101
(1 100 W)
Digital generator Heron® 8896217
(1.6 kW; Max.2.0 kW)
HIGH-PRESSURE WASHER
Minimum electrical power output of the generator
High-pressure washer Extol® Premium 8895200
(
1800 W
, max. 140 bar)
Digital generator Heron® 8896217
(1.6 kW; Max.2.0 kW)
y
Starting/operating power input: 1630 W/1500 W
High-pressure washer Extol® Industrial 8795200
(
3 000 W
, max. 180 bar)
Generator Heron® 8896413
(5.0 kW; Max. 5.5 kW)
y
Starting/operating power input: 2650 W/2550 W
y
Heron® 8896140 (3.0 kW; Max. 3.5 kW) can not be used
Summary of Contents for 8896430
Page 127: ......