39
î
Lubricate the drive chain by applying liberal
amount of SAE-90 oil or chain lubricant.
î
Tighten the rear axle nut and sleeve nut.
î
Check the drive chain slack again.
Lubrication
î
Turn the engine “OFF”, park the vehicle on
its main stand and shift the transmission into
neutral.
î
Rear brake pedal free play is affected when
repositioning the rear wheel to adjust drive
chain slack. Check rear brake pedal free
play and adjust as necessary
.
(page 41)
CAUTION
!
!
Regular adjustment and lubrication as per the
maintenance schedule would ensure high
performance and longer life.
NOTE
Visit Authorised
Hero MotoCorp
workshop
for inspection, cleaning, lubrication and
adjustment of drive chain at every 2000 km
.
Check the chain slider (1) for wear, The chain
slider must be replaced if the or wear limit is
reached. For replacement, visit your
authorised
Hero MotoCorp
workshop.
DRIVE CHAIN SLIDER
(Refer to “Maintenance Schedule” on
(page 26
).
(1) Chain slider (2) Wear limit
CUTOUT
2
1
FRONT BRAKE (DISC TYPE)
Master Cylinder/Reservoir.
Location: Right handle bar.
Castrol Q Stop-DoT 3 or DoT 4
Fluid level-Ensure that the brake fluid level
does not fall below “MIN” mark (1) on the
master cylinder, when checked with the
Brake fluid recommended:
1
(1) "MIN" mark
