23
BRAKING
î
For normal braking, close the throttle and
gradually apply both front and rear brake
together while shifting down gears to suit
your road speed.
î
For sudden deceleration/quick stopping,
close the throttle and apply the front and
rear brakes simultaneously.
WARNING
!
!
î
When descending a long steep slope use
engine braking (power) by changing to lower
gears, with intermittent use of both brakes.
Continuous brake application can overheat
the brakes
and
reduce their effectiveness.
î
Wherever possible, reduce speed or apply
brake before entering a turn, closing the
throttle or braking in mid turn may cause
wheel slip. Wheel slip will reduce control
over the vehicle.
î
Independent use of only the front or rear
brake increases stopping distance.
î
When riding in wet or rainy conditions, or on
loose surfaces the ability to stop the vehicle
reduces.
î
All your actions should be smooth under these
conditions. Sudden acceleration, braking or
turning may cause loss of control. For your
safety, exercise extreme caution when
braking, accelerating or turning.
î
Extreme braking may cause wheel locking
and reduce control over the vehicle.
PARKING
After stopping the vehicle, shift the transmission
into neutral, turn the fuel valve “OFF” and turn
the ignition switch “OFF”. Park the vehicle on
main stand, lock the steering and remove the
key.
CAUTION
!
!
î
Park the vehicle on firm level ground to
prevent overturning.
î
While parking on side stand engage the first
gear.
TOOL KIT
Kit consists of following tool:
î
Box wrench P 16 X 14 -1 No.
The tool kit (1) is located below the seat in the
rear. Some emergency repairs, minor
adjustments and parts replacement can be
performed with the tools contained in the kit.
î
Tool Bag-1 No.
î
+, - No. 2 driver-1 No.
î
Grip-1 No.
î
Pin spanner-1 No.
