Appendix F - Software Anomalies
In order for certain software to work properly with your laser system, some modifications might
have to be made. If using the following software, be sure to follow these instructions. If having
any difficulty making these adjustments, please contact our technical support.
CorelDraw
If experiencing problems printing text in CorelDraw!, especially mirrored text, make this
modification to the files listed below:
COREL 3.0
Find the CORELDRW.INI file usually located in the c:\coreldrw\draw\ subdirectory. Open this
file up in a text editor such as NOTEPAD, which comes with Windows. Scroll down about 55
lines to find the line that reads:
FontRasterizer=1
and change it to read:
FontRasterizer=0
Save this file and restart CorelDraw! for the changes to take effect.
COREL 4.0
Find the CORELAPP.INI file usually located in the c:\corel40\config\ subdirectory. Open this file
up in a text editor such as NOTEPAD, which comes with Windows. Scroll down about 63 lines
to find the line that reads:
FontRasterizer=1
and change it to read:
FontRasterizer=0
Save this file and restart CorelDraw! for the changes to take effect.
Summary of Contents for VANGUARD OPTIMA
