7
2. General information
Hermansen Copenhagen e-bikes are equipped with
innovative technology. Even if you are an experienced
rider, we strongly recommend you to attentively read
and observe the instructions in this manual before
riding your new e-bike.
Please familiarise yourself with all components of your
e-bike in the ‘Bike and components overview’ table
on the previous page where the bike components
referred to in this manual are identified.
In this manual, a number of maintenance and
repair tasks are described in detail. If you engage
in this activity, you must always consider that the
instructions are exclusively for Hermansen e-bikes
and not transferable to other bikes.
DANGER!
Torque settings in this manual are
specified in Nm. Do not rely on
your feeling “tight” because this is
simply not precise enough. ONLY
a torque wrench can ensure that a
bolt is properly tightened. You must
always use this tool to tighten the
components when a torque setting is
specified. A bolt that is too tight or too
loose can cause malfunctions which
could lead to an accident with serious
injuries as a result.
The content in this manual is subject to change or
withdrawal without notice. We make every effort
to ensure accuracy of its documentation and
assumes no responsibility or liability if any errors or
inaccuracies appear within. Please regularly visit
our website www.hermansencph.com and check the
download section to view and download the latest
version of the manual.
Note that the first assembly and adjustment of your
bike and subsequent service and maintenance
requires special tools and technical expertise. If
you are uncomfortable performing any of the listed
tasks, please seek the assistance of a qualified bike
mechanic.
ATTENTION!
Bike owners are responsible for assessing
the way they use the e-bike at all times
and should ensure that they take due care
of their safety and welfare when riding,
moving or carrying their e-bike.
Before using your e-bike, carefully read the
instructions in the supplied Electrical System Manual.
It is vital you follow all the safety instructions.
For your own safety perform the quick check
explained in chapter 9 before every ride.
NOTE: Hermansen e-bikes are referred to in this manual as e-bike, bike,
pedelec or EPAC, unless otherwise noted.
DANGER! This symbol indicates that life-threatening risks are possible if the
corresponding instructions are not followed. Please read carefully.
ATTENTION! Here is a hint that will help you quickly become familiar with
your e-bike and its technology.
TIP! This symbol indicates useful additional information
This symbol indicates that you must use a torque wrench and comply with
the specified torque.
In the manual we use the following symbols to highlight certain information:
Summary of Contents for Bike One 2021
Page 2: ...2 Bike One ...
Page 3: ...3 Bike Ten ...
