Hermann STEPS DIN EN 15194, User Manual

Page: 39 / 52

39
Speed sensor
Fig. Rear derailleur reset
km/h
11
25.0
BOOST
Abbrechen
Schaltwerk reset
OK
km/h
11
Schaltwerk reset
Schaltwerk reset Schaltwerk reset
10
km/h
Abbrechen
Schaltwerk reset
OK
10
km/h
Schaltwerk reset
12 Speed sensor
If the spoke magnet slips on the spoke, it will not be recognised by
the speed sensor. The warning “W011” will appear on the indicator.
• If the warning “W011” appears or the spoke magnet slips,
adjust the spoke magnet:
1� Loosen the screw of the spoke magnet.
2� Adjust the spoke magnet on the spoke so that it moves past
the speed sensor in the correct position (see
Fig. “Speed
sensor”
)�
3� Tighten the screw�
4� If the warning “W011” does not disappear, please consult
your specialist dealer�
Fig. Speed sensor
1 Sensor 2 Spoke magnet
1
2
13 Care
WarnInG
When performing care, maintenance and repairs, there is
a risk associated with the electrical current�
risk of electric shock and short circuit!
• Make sure the mains plug of the charger has been
pulled out off the socket�
• Remove the rechargeable battery�
• Do not clean the components with running water or
other liquids.
• Do not use a high-pressure cleaner or water jet.