37
Operation
•
To switch off the lights,
press
button 1
on the con-
trol unit or the
light button
on the display again� The
light symbol on the display
goes out (see
Fig. “Lights”
)�
note:
E7000 and SC-EM800
displays do not provide you
with any information about the
lighting status�
10.2.11
Walk assistance
CauTIon
If used incorrectly, your limbs could get caught in moving
parts�
risk of injury!
•
Only use the walk assistance function when pushing
the e-bike�
•
Only use the walk assistance function on level and solid
ground�
•
Only use the walk assistance function if the e-bike is on
both wheels�
Fig. Lights
1 Switched on
2 Switched off
1
2
Walk assistance helps you push the e-bike. With this function, the
speed depends on the selected gear and may reach up to 6 km/h.
The lower the selected gear, the lower the speed.
note:
Walk assistance will automatically switch off after one min-
ute without use�
Stand next to the e-bike and hold the handlebar with both hands.
1�
Fold the kickstand up.
2�
Use
button 2
or
button 3
to switch “OFF” the assistance
(see Chapter
“Setting the level of assistance” on page 35
)�
3�
Push
button 3
until “WALK” appears on the display panel.
Walk assistance is switched on.
4�
Push and hold
button 3
�
Walk assistance is on and the bike moves forward inde-
pendently�
Walk assistance will be deactivated as soon as one of the following
events occurs:
–
You release
button 3
�
–
The wheels of the e-bike are blocked, e.g. by braking or run-
ning into an obstacle�
–
The speed exceeds 6 km/h.
10.2.12
Switching between auto/Manual
You can switch from manual shifting to automatic shifting if you
have a control unit installed on the right handle�
• Simultaneously push
button 2
and
button 3
on the control
unit on the right handle�
The mode is shown on the main screen�
Summary of Contents for STEPS DIN EN 15194
Page 2: ......
Page 50: ......
Page 51: ......
Page 52: ...Sales Hermann Hartje KG Tel 49 0 4251 811 90 info hartje de www hartje de Presented by ...
