Hermann STEPS DIN EN 15194, User Manual

Page: 22 / 52

22
Operation
9.4.2 Charger
1� Read the information on the nameplate of the charger�
• If the information does not correspond to the power supply,
do not use the charger�
2� Insert the device plug in the mains connector jack of the
charger (see see Fig. “Charger” )�
3� Read Chapter
“Charging the battery” on page 26
before con-
necting the charger to the power supply�
Fig. Charger
1 LED 2 Mains plug 3 Charging plug
1
3
2
10 operation
10.1 rechargeable battery
10.1.1 removing the rechargeable battery
noTICe
The electronic system could be damaged�
risk of damage!
• Always switch off the e-bike before you take the recharge-
able battery out of the holder�
1� Switch the e-bike off (see Chapter “Switching off the e-bike”
on page 30 )�
2� Hold the rechargeable battery tightly by the handle�
3� Insert the key in the lock (see
Fig. “Frame rechargeable bat-
tery”
or
Fig. “Tube frame rechargeable battery”
)�
4� Turn the key to the left to open the lock�
5� Frame rechargeable battery:
• first tilt the frame rechargeable battery to the side and then
pull it up and out of the holder (see
Fig. “Removing the
rechargeable battery”
)�
• pull the rack rechargeable battery back and out of the
holder�