Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
Part no. 1BHH19 rev C.
TM
Y
,
L
, Canvas are among the trademarks of Herman Miller, Inc.
Illustrations and specifi cations are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifi cations at any time, without notice, and also to discontinue products.
6
YT200.
1. Remove protective backing from tape on underside of fi ller (E).
2. Firmly press fi ller into position on Slim Screen (D).
3. Turn screen upside down.
4. Determine work surface thickness where screen will be installed. Adjustment
Bracket is set for 1” thick surface. For 1 1/8” thick surface, Pull back and lift
up on clip on adjustment bracket until clip engages into next notch on bracket.
5. Loosen 2 screws on bottom of screen. (About 1/4 to 1/2 turn so sliding plate
will slide.)
6. Turn knob to end of threads, toward end cap.
E
D
Screw
Sliding Plate
Screw
Knob
End Cap
Adjustment Bracket
Clip
1” Surface
Location
1 1/8” Surface
Location
