Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
Part no. 1BHH19 rev C.
TM
Y
,
L
, Canvas are among the trademarks of Herman Miller, Inc.
Illustrations and specifi cations are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifi cations at any time, without notice, and also to discontinue products.
17
2. For mounting power module to top of work surface; remove protective backing
from tape, feed cord behind back of work surface, fi rmly press in place.
2. For mounting power module under
work surface; position module under
work surface, mark hole locations.
3. Set module aside, drill 1/8” diameter
pilot holes. Make sure not to drill
through work surface.
4. Return module to work surface. Secure
in place with 2 pan head wood screws
(Z).
T
T
Z
Mark Holes
