manualshive.com logo in svg

HermanMiller Ubi Work Tools, Installation And Disassembly For Recycling Instructions

Share
Download
HermanMiller Ubi Work Tools Installation And Disassembly For Recycling Instructions Download Page 10

Z

© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.

Part no. 1BHH19 rev C.

TM

 

Y

, 

L

, Canvas are among the trademarks of Herman Miller, Inc. 

Illustrations and specifi cations are based on the latest product information available at the time of publication. 

The right is reserved to make changes in design and specifi cations at any time, without notice, and also to discontinue products. 

10

YT300.

1.  

YT300.RNL:

 Remove protective backing from tape on bottom side of fi ller (H).

2.  Align fi ller with shelf surface (F).  Firmly press in place.

3.  

YT300.RBL, YT300.RBM, YT300.SBL, YT300.SBM:

 Slide brackets on 

     backdrop assembly (J) under shelf surface.

4.  Secure backdrop to shelf surface with 4 truss head screws (K).

5.  Place Shelf Assembly into disired location on performance rail.  (YT300.SNL 

     shown).

F

F

H

J

Summary of Contents for Ubi Work Tools


























Reviews:

No comments

Brands by name

Popular brands

Load more brands