Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
Part no. 1BHH19 rev C.
TM
Y
,
L
, Canvas are among the trademarks of Herman Miller, Inc.
Illustrations and specifi cations are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifi cations at any time, without notice, and also to discontinue products.
16
4. Set Cord Cleat onto work surface and up against back edge.
5. Turn knob until foot rotates to face out toward front of work surface.
6. Hold foot in place. Tighten knob.
Foot
YT420.
1a. For mounting USB Power Module onto organizer, shelf or under work surface;
attach Puck Plate (W) to USB Hub (T) with 2 fl at head screws (Y).
1b. For mounting USB Power Module onto top of work surface; remove protective
backing from double sided tape (X). Firmly press tape on middle of underside
of USB Hub (T).
W
Y
T
X
T
