manualshive.com logo in svg

HermanMiller Ubi Work Tools, Installation And Disassembly For Recycling Instructions

Share
Download
HermanMiller Ubi Work Tools Installation And Disassembly For Recycling Instructions Download Page 1

Z

© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.

Part no. 1BHH19 rev C.

TM

 

Y

, 

L

, Canvas are among the trademarks of Herman Miller, Inc. 

Illustrations and specifi cations are based on the latest product information available at the time of publication. 

The right is reserved to make changes in design and specifi cations at any time, without notice, and also to discontinue products. 

1

Y

Ubi

™

 Work Tools Work Tools Installation and Disas-

sembly for Recycling Instructions

Parts Included:

Organizer

Surface Clamp

Slim Screen

Steel Screen

Liner (2)

Liner

A

B

C

D

AN

E

YT460.

YT500.

YT540.

YT100./YT150.

YT200.

YT250.

YT300.

Rail Mounted Shelf

14-10 x 5/16 Torx Head 

Sheet Metal Screw (6)

8-32 x 5/16 Truss Head 

Machine Screw (4)

Surface Mounted Shelf

Liner

Back Drop

F

AP

K

G

H

J

YT510.

Summary of Contents for Ubi Work Tools


























Reviews:

No comments

Brands by name

Popular brands

Load more brands