installation instructions | 15
Mechanical
Installation
The
Dipper
comes with a 12mm undercoated MDF face panel and an aluminium
ceiling trim.
We recommend that you paint this panel before fixing the
Dipper
in the ceiling.
In the case of a non-plasterboard ceiling, you may choose to fabricate your own
ceiling panel (eg from the same timber/material as the ceiling itself) to match.
We recommend you leave a 2mm gap around all edges of the Dipper’s face
panel.
Supplied is a plastic trim that you may use to finish off the edge of the hole. The
cutout dimensions given below assume that you will use this ceiling trim.
Face Panel
L x W mm
Cutout required with ceiling trim
L X W mm
Medium Dipper
400 x 400
410 x 410
Large Dipper
500 x 500
510 x 510
Ceiling Opening
