Herkules Hebetechnik GmbH HLS 1200-11, Operating Manual And Test Record

Page: 31 / 44

M
AINTENANCE
31
10.4 Lubrication and Test Points
Diagram 8: Lubrication and test points
No. Description Lubrication and test points
1
bearing pin overhead
(right and left) - Check the safety washers from both of the bearing pins for proper
fit.
- lubricate bearing pin
2
sliding surfaces of the
scissors (right and left) - Check the sliding surfaces of the scissors for wear.
- lubricate sliding surfaces
3 scissor pins (right and left) - Check that the scissor pins are properly fixed.
- Check the safety nuts.
4
bearing pins below (right
and left) - Check the safety washers from both of the bearing pins for proper
fit.
- lubricate bearing pin
5 sliding pads and guide
rails above (right and left) - Check sliding pads for damage and wear.
- Lubricate sliding pads and guide rails.
6 bearing pin safety catch
(right and left) - Check the safety washers from both of the bearing pins for proper
fit.
- lubricate bearing pin
7
air bags - Check air bags for damage.
- Check the screws on the air bags reinforcement both above and
below for proper fit.
- Treat the surface of the air bags with the appropriate rubber care
product.
8
sliding pads and guide
rails below (right and left) - Check sliding pads for damage and wear.
- Lubricate sliding pads and guide rails.
7
8
3
4
5
1
6 2