Herkules Hebetechnik GmbH HLS 1200-11, Operating Manual And Test Record

Page: 29 / 44

M
AINTENANCE
29
10 Maintenance
Maintenance work should be carried out at the specified maintenance intervals and only by qualified persons.
Neither water nor flammable liquids may be used during the cleaning process.
To ensure durability and continuous operation of the service lift, the following points should be observed:

Only spare parts from the original manufacturer and suitable tools may be used.

Regular maintenance intervals must be observed.

For all maintenance work not outlined or explained in this instruction manual, please
contact your supplier or customer service of the manufacturer.
Only perform maintenance when the lift achieves a max. (unloaded), the lift platform is braced with service
supports, and the compressed air supply is disabled!
Maintenance
intervals
Points to follow Comments
Monthly
All moveable parts such as pivot bolts, sliding
pads, and sliding surfaces should be check for
wear and tear, cleaned, and lubricated.
Check air bags and air tubes for any damages.
Visually inspect and check for leaks.
Examine the surface of the air bags for
impurities, then clean, and maintain.
Inspect valves for functionality and check for
leaks.
Check that the dowels are properly fixed.
If necessary re-install or renew the support.
Inspect the maintenance unit (filter regulator,
provided by the customer), and consult the
product manufacturer's instructions.
Only use lubricants that contain
no adhesive-repelling
substances in the area to be
lubricated.
Only suitable care and cleaning
agents are to be used on rubber
surfaces.
Yearly Regular safety check
(In accordance with §10 ( 2 ) German Plant
Health and Safety regulations)
For test protocol see Chapter
“
Regular Safety Check
”
.
Replace the safety
valve After every 2 years of operation.
Every 6 years of
operation Replace the complete air hoses.