background image

MY21H01 - 32_1.0_30.07.2020

32

Assembly

5

Assembly 

Assemble the pedelec in a clean, dry 
environment.

The 

work environment

 temperature should be 

between 15 °C and 25 °C. 

The fitting stand used must be approved for a 
maximum weight of at least 30 kg. 

5.1

Required tools

The following tools are required to assemble the 
pedelec:

5.2

Unpacking 

The packaging material consists mainly of 
cardboard and plastic film. 

The packaging has to be disposed of in 
accordance with the regulations of the 
authorities.

5.2.1

Scope of delivery

Pedelecs are fully assembled in the factory for 
test purposes and then dismantled for 
transportation.

The pedelec is 95 - 98% pre-assembled. The 
scope of delivery includes:

• the pre-assembled pedelec 
• the front wheel 
• the pedals 
• quick release (optional) 
• the charger 
• the 

operating instructions

.

The battery is supplied separately from the 
pedelec.

5.3

Preparing the battery

5.3.1

Checking the battery

The battery must be checked before it is charged 
for the first time.

1

Press the 

On-Off button (battery)

.

If none of the LEDs on the battery level 
indicator light up, the battery may be damaged.

The battery may be fully charged if at least one, 
but not all, of the LEDs on the battery level 
indicator is lit up.

Risk of eye injury 

Problems may arise if the settings are not made 
to components correctly and you may sustain 
serious injuries as a result.

Always wear safety glasses to protect your 
eyes during assembly.

Crash and crushing hazard caused by 
unintentional activation

There is a risk of injury if the drive system is 
activated unintentionally.

Remove the battery.

• Knife,
• Hexagon socket spanner 2 (2.5 mm, 3 mm, 

4 mm, 5 mm, 6 mm and 8 mm),

• Torque wrench with working range between 

5 and  40 Nm,

• Ratchet,
• Twelve-point square socket T25,
• Ring spanner (8 mm, 9 mm, 10 mm), 13 mm, 

14 mm and 15 mm) and

• Cross, flat head and ordinary screwdriver,
• TORX® T25 wrench l

WARNING

!

CAUTION

!

Summary of Contents for Rob Family F360






































































































Reviews: