Hercules Rob Family F360, Translation Of The Original Operating Instructions, Page: 28 / 101

MY21H01 - 32_1.0_30.07.2020
28
Overview
Applies only to eShift with NuVinci H|Sync/enviolo with
Optimized H|Sync
The following additional functions are available on
the function display:
Applies only to eShift with Rohloff E-14 Speedhub 500/14
The following additional functions are available on
the function display:
3.7.5.10 System settings and data
In order to see the system settings and data, the
rider has to call up the system settings. The rider
can change the values of the system settings, but
not the system data.
3.7.5.11 Additional system settings
Applies only to eShift with Shimano DI2 automatic hub gears
Applies only to eShift with manual Shimano DI2 hub gears.
Indicator Change
± NUVINCI CADENCE /
± NUVINCI GEAR
The current gear shift is shown
on the display screen. The new
gear is shown briefly on the
screen each time it is changed.
The standard setting is
± NuVinci cadence.
Table 26: Changing the system settings
Indicator Change
GEAR
The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 27: Changing the system settings
Indicator Function
- CLOCK + Changes the time
- WHEEL Wheel circumference in mm
- E Changes the language
- UNIT KM/MI +
Selects whether the speed and
distance are displayed in
kilometres or miles
- TIME
Select whether the time is
displayed in 12-hour clock or
24-hour clock format
- SHIFT RECOM.OFF + Switches the gear
recommendation on and off
Table 28: Changeable system settings
Indicator Function
POWER ON HOURS Display of the total journey duration
DISPL. VX.X.X.X Display software version
DU VX.X.X.X Drive system software version
DU# XXXX XXXXX Drive system serial number
SERVICE MM/YYYY (Alternative) defined inspection
date
SERV. XX KM/MI (Alternative) defined inspection
BAT. VX.X.X.X Software version
1.BAT VX.X.X.X Software version
2.BAT VX.X.X.X Software version
Table 29: System information, unvarying
Indicator Change
– Start gear + This is where you can set the start
gear. The automatic gear switch
function is switched off in Position
– –. This menu option is only
shown when the display is
positioned in its mount.
Gear adjustment You can use this menu option to
make a fine adjustment to the
Shimano DI2. You'll find the
specified setting range in the gear
manufacturer's operating
instructions. Make the fine
adjustment as soon as you hear
any unusual noises from the gear
shift. This menu option is only
shown when the display is
positioned in its mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 30: Changing the system settings
Indicator Change
– Start gear + This is where you can set the start
gear. The automatic gear switch
function is switched off in Position –
–. This menu option is only shown
when the display is positioned in its
mount.
Gear adjustment You can use this menu option to
make a fine adjustment to the
Shimano DI2. You'll find the
specified setting range in the gear
manufacturer's operating
instructions. Make the fine
adjustment as soon as you hear any
unusual noises from the gear shift.
This menu option is only shown
when the display is positioned in its
mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the display is positioned in its
mount. This menu option is only
shown if you have an electronic
control gear.
Table 31: Changing the system settings