034-11421_0.1_10.10.2017
69
Operation
Connect the mains plug of the charger to a normal
domestic, grounded socket.
Connect the charging cable to the battery's
charging port.
The charging process starts automatically.
During the charging process the operating and
charge status indicator indicates the charge status.
When the drive system is switched on, the
display
shows the charging process.
The charging process is complete when the LEDs
of the operating and charge status indicator go out.
Risk of fire and explosion caused by
damaged batteries.
The safety electronics on
damaged or faulty batteries may fail. The residual
voltage can cause a short circuit. The batteries may
self-ignite and explode. If the battery becomes
deformed or begins to smoke, keep at a safe distance,
disconnect the power supply at the socket, and notify
the fire service immediately. Never extinguish
damaged batteries with water or allow them to come
into contact with water.
If an error occurs during the charging
process, a system message is displayed. Remove the
charger and the battery from operation immediately
and follow the instructions.
Connection data
230 V, 50 Hz
CAUTION
!
NOTICE
EN_034-11421_0.1_0.01_09.18_HERCULES BROSE_CS_Inhalt.book Page 69 Wednesday, October 11, 2017 9:53 AM
