manualshive.com logo in svg

Hercules ALASSIO, Translation Of The Original Operating Instructions

Share
Download
Hercules ALASSIO Translation Of The Original Operating Instructions Download Page 33

034-11421_1.0_11.10.2017

31

Description

A pushing aid can be activated. The pushing aid 
continues to drive the bicycle at a slow speed as long 
as the rider pushes the 

pushing aid button

 on the 

handlebars

. The maximum speed can be 6 km/h here. 

The drive stops when the 

pushing aid button

 is 

released.

4.6.1

Battery

The lithium ion battery has an internal electronic 
protection circuit. It is matched to the charger and the 
bicycle. The temperature of the battery is monitored 
constantly. The battery is safeguarded against deep 
discharge, overcharging, overheating and short 
circuit. In case of a risk the battery is switched off 
automatically by a protective circuit. The battery also 
switches to sleep mode for self-protection when not 
used for a longer period.

The service life of the battery can be extended if it is 
well cared for and, above all, stored at the correct 
temperatures. Even if the battery is cared for properly, 
the charge status of the battery reduces as it ages. If 
the operating time is severely shortened after 
charging, this is a sign that the battery is spent.

EN_034-11421_0.1_0.01_09.18_HERCULES BROSE_CS_Inhalt.book  Page 31  Wednesday, October 11, 2017  9:53 AM

Summary of Contents for ALASSIO

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands