manualshive.com logo in svg

Hercules ALASSIO, Translation Of The Original Operating Instructions

Share
Download
Hercules ALASSIO Translation Of The Original Operating Instructions Download Page 43

034-11421_1.0_11.10.2017

41

Transportation, storage and assembly

5

Transportation, storage and 

assembly 

5.1

Transportation 

Crash caused by unintentional activation

There is a risk of injury if the drive system is activated 
unintentionally.

Remove the battery before the bicycle is
transported.

Risk of fire and explosion due to high 
temperatures

Excessively high temperatures damage the batteries. 
The batteries may self-ignite and explode.

Never expose the battery to sustained direct
sunlight.

If the bicycle is lying flat, oil and grease may leak from 
the bicycle.

If the shipping carton with a bicycle is lying flat or on 
one end, it does not provide sufficient protection from 
damage to the 

frame

 and the wheels.

Only transport the bicycle in an upright position.

Bicycle rack systems which secure the bicycle 
standing on its head by the 

handlebars 

or 

frame

, 

generate inadmissible forces on the components 
during transportation. This can cause the supporting 
parts to break.

Never use bicycle rack systems which secure the
bicycle standing on its head by the 

handlebars 

or

frame

.

CAUTION

!

CAUTION

!

NOTICE

NOTICE

EN_034-11421_0.1_0.01_09.18_HERCULES BROSE_CS_Inhalt.book  Page 41  Wednesday, October 11, 2017  9:53 AM

Summary of Contents for ALASSIO

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands