30
17.2. Electromagnetic Immunity - for all Equipment and Systems
Guidance and manufacture’s declaration – electromagnetic immunity
The HeraBEAT
TM
US device is intended for use in the electromagnetic environment specified below. The customer or
the user of the device should assure that it is used in such an environment.
Immunity Test
IEC 60601 test level
Compliance level
Electromagnetic environment – guidance
Electrostatic discharge
(ESD) IEC 61000-4-2
±8 kV contact
±2 kV, ±4 kV,
±8 kV, 15 kV air
±8 kV contact
±2 kV, ±4 kV,
±8 kV, 15 kV air
Floors should be wood, concrete or ceramic tile. If floor are covered with synthetic
material, the relative humidity should be at least 30%.
The manufacturer may recommend the ESD precautionary procedures to user.
Power frequency
(50Hz/60Hz) magnetic
field IEC 61000-4-8
30 A/m, 50 or 60 Hz
30 A/m, 50 or 60 Hz Power frequency magnetic fields should be at levels characteristic of a typical
location in a typical commercial or hospital environment.
Emission Test
Compliance
Electromagnetic environment – guidance
RF emissions CISPR 11
Group 1
The
HeraBEAT
TM
US device uses RF energy only for its internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in nearby electronic equipment.
RF emissions CISPR 11
Class B
The
HeraBEAT
TM
US device is suitable for use in all establishments, including domestic establishments and
those directly connected to the public low-voltage power supply network that supplies buildings used for
domestic purposes.
Guidance and manufacture’s declaration – electromagnetic emission
The HeraBEAT
TM
US device is intended for use in the electromagnetic environment specified below. The user of the
device should assure that it is used in such an environment.
17.1. Electromagnetic Emissions - for all Equipment and Systems
Appendices
Summary of Contents for HeraBEAT
Page 2: ......