Original Instructions
4
Operation
a) Keep supply and extension cords away from cutting means.
b) Wear eye protection and stout shoes at all times while operating the machine.
c) Avoid using the machine in bad weather conditions especially when there is a risk of
lightning.
d) Use the machine only in daylight or good artificial light.
e) Never operate the machine with damaged guards or shields or without guards or shields in
place.
f) Switch on the motor only when the hands and feet are away from the cutting means.
g) Always disconnect the machine from the power supply (i.e. remove the plug from the mains,
remove the disabling device or removable battery)
1) whenever the machine is left unattended.
2) before clearing a blockage.
3) before checking, cleaning or working on the machine.
4) after striking a foreign object.
5) whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the cutting means.
i) Always ensure that the ventilation openings are kept clear of debris.
Maintenance and storage
a) Disconnect the machine from the power supply (i.e. remove the plug from the mains, remove
the disabling device or removable battery) before carrying out maintenance or cleaning work.
b) Use only the manufacturer’s recommended replacement parts and accessories.
c) Inspect and maintain the machine regularly. Have the machine repaired only by an authorized
repairer.
d) When not in use, store the machine out of the reach of children.
KEY INFORMATION YOU SHOULD KNOW
The guard must be installed before trimming, if not, the motor will overheat, and void your
warranty.
Know Your Tool
·
Warning!
Carefully read the instructions in this manual to reduce the risk of injury or material
damage.
· Read all of this manual carefully before operating the tool.
· Before operating the tool, make sure that you know how to switch the tool off in an emergency.
· Retain this manual for future reference.
Specific Safety Rules
1.
Before use check the supply and extension cord for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the supply immediately.
2.
DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the appliance
if the cord is damaged or worm.
3.
Read the instructions carefully. Be familiar with the controls and proper use of the equipment.
4.
Keep extension cord away from cutting elements.
5.
Wear protective glasses or goggles.
6.
Never allow children or people unfamiliar with the instructions to use the machine.
7.
Stop using the machine while people, especially children, or pets are nearby.
8.
Only use the machine in daylight or good artificial light.
9.
Before using the machine and after any impact, check for signs of wear or damage and repair as
