User manual Integra Mini 300
21
HENSEL-VISIT International GmbH
Â
Remove the protective glass cover; see „Protective glass
cover“ on page 11.
ATTENTION!
Should the glass body of the flash tube be broken, do not touch
the electrodes under any circumstance! In this case, use a fully
insulated pair of pliers to remove the damaged flash tube.
C
D
D
A
B
0,5 m
m
Â
Unwind the ignition wire
B
from the connector pin
C
.
Â
Carefully pull the flash tube
A
out of the plug-in base
D
.
Â
Insert a new flash tube of the proper type into the plug-in
base
D
and push the flash tube into position until the arres-
ter engages.
Â
Now pull out the flash tube approximately 0.5 mm so that
the glass body can expand when heating up.
Â
Wind ignition wire
B
around the connector pin
C
.
Fitting flash tubes for the compact flash unit
Integra Mini 300
can be found in the chapter „11 Accessories“ on page 26.
Summary of Contents for Integra Mini 300
Page 1: ...Integra Mini 300 Kompaktblitzgerät Compact flash ...
Page 31: ......
