User manual Integra Mini 300
44
HENSEL-VISIT International GmbH
Change the time with the keys
Â
q
4
and
p
5
in 5-minute
steps, up to a maximum of 90 minutes.
Selecting „--“ turns the function off completely.
Normal operation is resumed automatically 5 sec. after the last
use of any key.
Note:
Turn off the modeling light during longer breaks to conserve
energy and to extend the life span of the lamp.
Performance output adjustment
The keys
q
4
und
p
5
are used to adjust the flash output in
steps covering a performance output range of 6 f-stops.
p
increases the output,
q
reduces the flash unit’s output.
A
•
short
push on the touch key changes the output in 0.1
f-stop increments
A
•
longer
push on the touch key changes the output in full
f-stops
The LED display
3
shows the selected settings from 5.0 (lowest
output) to 10 (maximum output).
Note:
When the performance output is reduced to a lower setting, the
stored energy has to be dumped before using the flash. To do
this, use the test trigger function.
Test flash
The touch key
TEST 15
allows you to manually trigger the test
flash. The unit flashes with fastest flash sequence when the
touch key is pressed longer.
Flash ready
The green LED
10
above the
TEST
key
15
indicates that the flash
is ready.
Summary of Contents for Integra Mini 300
Page 1: ...Integra Mini 300 Kompaktblitzgerät Compact flash ...
Page 31: ......
